Namino BIANCO

Namino BIANCO is a basic device capable of connecting other devices and Arduino Uno Shields. Another advantage is that Namino BIANCO is Open Hardware, so you can see how it is made.

CPUs and memories:

• ESP32-S3-WROOM-1U-N4R8 (ESP32-S3 series of embedded SoCs, Xtensa®dual-core 32-bit LX7 microprocessor, up to 240MHz)
• 4MB Flash
• 512KB SRAM
• 8MB PSRAM
• 16KB SRAM in RTC

NAMINO BIANCO provides the following interfaces:

• Arduino Uno shield interface
• Mikroe interface
• Qwiic interface (I²C)

In addition to the interfaces (Arduino Uno, Mikroe, Qwiic) there are the following input and output lines:

• 6 input lines capable of reaching up to 30V
• 2 x USB type C device for programming and usage (NOT OTG)
• 1 RS485 (for modbus RTU master/slave as well)
• 1 pushbutton for programming
• 1 pushbutton for reset
• 1 led white programmable
• 1 led white as power indicator
• Wi-Fi (802.11 b/g/n, Bit rate: 802.11n up to 150 Mbps) - need antenna (not included)
• Bluetooth LE: Bluetooth 5, Bluetooth mesh - need antenna (not included)
• Wi-fi / bluetooth antenna connector

NOTE: WiFi and BT shares the same antenna

Power supplies:

• 5Vdc via USB
• 7Vdc ÷ 28Vdc